Malossi 50cc Cylinder Kits for Piaggio 2T Scooters

If you are looking to increase the performance of a 50cc 2T Piaggio scooter without increasing the capacity, Malossi manufacture both air and liquid cooled cylinder kits designed exactly for that purpose. Both cylinder kits are available through VE(UK), the Malossi Spa Appointed Sole UK Distributor.

Manufactured from cast iron, these 50cc cylinder kits have been designed to offer fantastic value for money while providing a reliable performance increase over a standard cylinder, whilst retaining the quality of Italian engineering.

Both cylinder kits are supplied with piston, rings, gudgeon pin, piston circlips, and cylinder gasket set, as well as a matched cylinder head. 

In addition to VE's highly competitive “Flat Rate” items VE have revised prices across many thousands of Malossi parts to ensure you get the best deal. See for yourself at: www.ve-uk.com

VE (UK) are the official Factory Appointed Sole UK Importer for Malossi Performance Products. VE (UK) stocks the full range for both classic and automatic scooter models. 

To browse the complete range of Malossi Performance Products available from VE (UK), visit www.ve-uk.com

You can now order online at www.ve-uk.com

Casa Lambretta 185cc & 225cc Cylinder Kits from VE (UK)

VE (UK) stock a wide range of Casa Lambretta performance products including the 185cc and 225cc cylinder kits.

With both kits designed and manufactured to give a significant power increase straight from the box, requiring little to no modifications other than jetting they make the perfect choice for any owner.

The 225 cylinder (CL10019) for large block motors uses a 70mm piston and is suitable for any 200cc Lambretta engine. Supplied with all required gaskets and a cylinder head. 

Casa’s 185cc cylinder (CL10005) for small block motors is suitable for any 125/150/175cc Lambretta engine and is simply a matter of fit - re jet - enjoy. The cylinder kit is supplied complete with all gaskets and cylinder head.

A key feature of both cylinders is that they can be used with any carb or exhaust system from standard to full race specifications.

To browse the complete range of Casa Lambretta products available from VE (UK), visit www.ve-uk.com

You can now order online at www.ve-uk.com

VE Actif Vespa Small Frame/90SS Fibreglass Bodywork

VE (UK) manufacture their own range of replacement fibreglass bodywork for the Vespa small frame range of scooters under the VE Actif range of products.

All items are manufactured to the highest standard and are supplied finished in a white gelcoat ready for priming and painting in the colour you require. All parts fit the complete range of small frame scooters with the exception of the dummy tanks which are expressly for the 90SS.

VE30515: 90SS style front mudguard

VE30516: NFK replica race seat with added reinforcement

VE30517: 90SS dummy tank with lid and lock. Supplied fully assembled and ready to paint.

To order the above or view the complete range of bodywork available from VE (UK), visit: www.ve-uk.com 

You can now order online at www.ve-uk.com   

High Quality Oil from VE (UK)

High quality oil should be on the top of everyones list when performing any servicing work on their machine. VE (UK) stock a wide range of Maloss, Putoline, and ENI oils in both 2T and 4T variants.

Malossi oils:

Malossi produce a range of 2T and 4T performance oils in both semi-synthetic and fully synthetic formulations that have special additives making them suitable for use in both standard and tuned engines. The popular range of oils are used exclusively in the Malossi race series in Italy. Supplied in 1L bottles.

Putoline Oils:

Putoline have been a firm favourite of scooterists over the years, with a range of high quality lubricants covering 2T, 4T, and Classic scooters. Popular options include TT Sport, Scooter 4T+ Eco, and Classic Scooter.

ENI oils:

ENI oils have for a long time been recognised by leading manufacturers as one of the market leaders. Seen at Formula One races and used by Ferrari, and other top automotive marques. In the 60's AGIP (ENI) was the recommended oil for Lambretta scooters. ENI oils are suitable for use in all 2T and 4T scooter and motorcycle applications. Supplied in 1L bottles.

To view the complete range of lubricants available from VE (UK) visit:  www.ve-uk.com

You can now order online at www.ve-uk.com 

Simonini Classic Vespa Exhaust Systems

VE (UK) stock the range of Simonini Classic Sports exhausts in either black or chrome finishes, for the Vespa PX 125/150/200 and the Vespa T5.

This ever popular exhaust system for Classic 2 stroke scooters, features an upswept muffler with an aluminium sleeve, and exits on the engine side of the scooter allowing owners to change the rear wheel with ease. This design also allow the use larger tyre sizes and the retention of the original spare wheel.

Designed for use on both standard and scooters fitted with a cylinder kit, the exhaust boosts performance and retains good mid range power output.

To order the above or view the complete range of performance exhaust systems available from VE (UK) visit: www.ve-uk.com

You can now order online at www.ve-uk.com   

NEW - Malossi Reed Valve Carb Kits for 135 MHR

Owners of a Vespa small frame scooter with the Malossi 135 MHR cylinder kit fitted now have two new choices of carburettor kit available to them. The new carb kits available through VE (UK) have been specifically designed to work solely with the 135 MHR.

Malossi have a philosophy of “plug and play” when it comes to carburettor kits and with the addition of specific reed blocks for the MHR cylinder, performance, ease of installation, and reliability are assured. 

28mm reed valve carb kit (VM166309): Comprising of a rubber mount VHST 28 carburettor, inlet manifold, reed block, performance air filter, blanking plates and all the required mounting hardware to complete the job, the reed valve carb kit allows a straightforward conversion to reed valve induction. Also available as a 25mm reed valve carb kit under part number VM166561.

In addition to VE's highly competitive “Flat Rate” items VE have revised prices across many thousands of Malossi parts to ensure you get the best deal. See for yourself at: www.ve-uk.com

VE (UK) are the official Factory Appointed Sole UK Importer for Malossi Performance Products. VE (UK) stocks the full range for both classic and automatic scooter models. 

To browse the complete range of Malossi Performance Products available from VE (UK), visit www.ve-uk.com

You can now order online at www.ve-uk.com

   

Casa Lambretta Rubber Kits

The restoration of a classic scooter can be a costly affair buying the rubber parts required individually. VE (UK) has a solution for those Lambretta owners who are looking for ‘high quality’ replacement bodywork rubbers for their scooter with a range of kits by Casa Lambretta.

The Casa Lambretta bodywork rubber kits are moulded/extruded from supple high quality rubber and available in either black or grey to suit your particular scooter. The kits contain a comprehensive set of rubbers that also include handlebar grips for a complete finishing kit package. 

The kits are available for the following models of Lambretta: LI Series 3, GP, SX, TV, and Series 1/2 (as shown).

Series 1/2 grey - CL14004

Series 3 LI grey - CL14005

Series 3 SX/TV - CL14006

Lamb GP black - CL14007

To browse the complete range of Casa Lambretta products available from VE (UK), visit www.ve-uk.com

You can now order online at www.ve-uk.com

NEW - Standard Gear Cluster for Vespa Small Frame & PK

VE (UK) now stock a standard replacement gear cluster for Vespa small frame and PK scooters. 

The new Italian manufactured gear cluster (VC11183) has a standard tooth count of 22-18-14-10. Produced from high quality hardened steel and is manufactured to either meet or exceed OE specifications. Aimed at owners who are rebuilding an engine or have suffered the misfortune of a damaged taper or gears. 

The gear cluster is a direct replacement for standard fitment on the following models: 

50 Special, 50SS, 90SS, 90 Racer, PK 50S, PK 50XL, PK 100S, PK 100XL, P125 ETS, PK 125S, Primavera 125, and ET3. 

To view the complete range of transmission products available from VE (UK), visit  www.ve-uk.com

You can now order online at www.ve-uk.com  

Noco Battery Chargers

Maintaining your battery and keeping it a peak condition when your machine is not in use couldn’t be be easier with these high quality Noco chargers available from VE (UK). 

The G750 charger features a .75 amp charging current and is suitable for all lead acid 6V and 12V batteries. Inbuilt safety features include spark protection, reverse polarity, over-charging, open circuit, and overheating. The charger also includes smart battery monitoring which alters the charging rate based on ambient temperature, optimises the battery chemistry for increased performance and longevity, and a recovery function to help revive batteries that have seen better days.

The G1100 charger has all of the great features found on the smaller G750 but increases the charging current to 1.1 amp, and adds support for Lithium Ion chemistry batteries.

Both chargers are dirt, water, UV, impact and crush resistant to ensure a rugged product that will handle any situation.

To order the above or view the complete range of battery chargers available from VE (UK), visit www.ve-uk.com

You can now order online at www.ve-uk.com