NEW - VESPA PX125/150 23/67 clutch drive gears

Classic Vespa PX125/150 owners with 7 and 8 spring clutches looking to change to a 23 tooth drive gear to raise the gear ratio, can now do so with these 2 new parts available from VE (UK).

The new drive gears feature the same 23 tooth count as the PX200 clutch drive gear but have been specifically machined to fit the 125/150cc clutches and mate with either a 67 or 68 tooth primary drive gear. 

VE11107-23-67: 7 spring 23/67 clutch drive gear

VE11170-23-67: 8 Spring 23/67 clutch drive gear

The drive gears are also available in 20, 21, 22, and 23 (PX200) tooth versions to offer a wide range of gear ratio possibilities. 

Clutch Gear   Primary Gear       Gear Ratio

20 67 3.35:1

21 67 3.19:1

22 67 3.05:1

23 67 2.91:1

20 68 3.40:1

21 68 3.24:1

22 68 3.09:1

23 68 2.96:1

To view the complete range of clutch components available from VE (UK), visit: www.ve-uk.com 

You can now order online at www.ve-uk.com or call us on 0115 946 2991.

NEW - Casa 225SS Cylinder Kit

Now available from VE (UK) is the Casa Lambretta 225SS cylinder kit for 200cc Lambrettas.

Designed by Casa to provide the best and most powerful 225cc cylinder kit on the market for the Lambretta large block motors, the cylinder kit (CL10025) was tested for 3 years on the race tracks around Europe before being made available to the public. 

Manufactured from a high pressure cast alloy, the cylinder is mated with a forged 39mm compression height piston to provide a perfect piston to bore match. Supplied with a 6 petal reed valve and an inlet manifold suitable for a 34mm carburettor.

The default configuration is supplied with a 39mm compression height piston and inlet rubber to suit a 34mm carb, however other variants available to order include:

• 30mm compression height with inlet rubber to suit 28/30mm carbs

• 30mm compression height with inlet rubber to suit 34mm carb

• 30mm compression height with inlet rubber to suit Mikuni 35mm TMX

• 39mm compression height with inlet rubber to suit 28/30mm carbs

• 39mm compression height with inlet rubber to suit Mikuni 35mm TMX 

To view the complete range of Casa Lambretta products available from VE (UK), visit: www.ve-uk.com 

You can now order online at www.ve-uk.com or call us on 0115 946 2991.

New - Suzuki Burgman 200 e3 Malossi Transmission Parts

Malossi have introduced 2 new key tuning products for the Suzuki Burgman 200 Euro 3 models which are now available from VE (UK).

Malossi Multivar Variator (VB513393): Malossi have always been at the forefront of variator development, and the new Malossi Multivar Variator has been designed to offer a more consistent and reliable shifting process, with redesigned face and roller ramp angles to obtain the very best power transfer from the scooters engine, whilst offering an extended service life.

Malossi X-K Drive Belt (VB619956): Malossi's Kevlar drive belts are renown the world over. They offer several key benefits over the OE belt, increased grip, increased time between service intervals and reinforced layers to increase belt life, all leading to a more reliable transmission setup.

Malossi performance products are exclusively imported by VE (UK), the Malossi Spa Appointed Sole UK Distributor. Purchasing your Malossi performance products through VE (UK) ensures that you are buying genuine factory supplied parts.

To order the above or view the complete range of Malossi products available from VE (UK) visit: www.ve-uk.com/malossi

You can now order online at www.ve-uk.com or call us on 0115 946 2991.

NEW - Mitas Touring Force Scooter Tyre

Now available from VE (UK) is the new Mitas Touring Force scooter tyre, a tyre designed to promote comfort and safety.

The tyre has a specially designed tread compound that provides high levels of comfort with excellent handling. The pattern features excellent water displacement while providing optimum road contact at extreme leak angles in all weather conditions. 

Currently available in 12” fitments with more sizes to follow.

To view the complete range of tyres available from VE (UK), visit: www.ve-uk.com 

You can now order online at www.ve-uk.com or call us on 0115 946 2991.

NEW - Malossi "Ventilvar" Static Half Pulleys

Malossi have added 2 new static half pulleys to their product line up that complement the range of Malossi variators perfectly.

The new “Ventilvar” pulleys are finished with a diamond tipped tool on the drive side to ensure a perfect finish and feature a revised working angle to further increase the gearing range of the automatic transmission. The increased cooling benefits offered by the pulley lead to improved transmission performance and less belt slip due to heat.

Models covered by the new pulleys include:

VB614701: Kawasaki J300, Kymco Dink 300, Kymco Downtown 300, Kymco Super Dink 300

YM615285: Yamaha T Max 530 2012>

Malossi performance products are exclusively imported by VE (UK), the Malossi Spa Appointed Sole UK Distributor. Purchasing your Malossi performance products through VE (UK) ensures that you are buying genuine factory supplied parts.

To order the above or view the complete range of Malossi products available from VE (UK) visit: www.ve-uk.com/malossi

You can now order online at www.ve-uk.com or call us on 0115 946 2991.

NEW - Pinasco Vespa PX 250cc Engine Kits

VE (UK) are now taking preorders for the newly announced 250cc Vespa PX engine kits which are available in either standard rotary induction “Master” (VE10815) or reed valve induction “Slave” (VE10816) versions.

Both tuning kits include all the major components required to build a new 250cc engine: engine casings, cylinder kit, crankshaft, clutch, ignition kit, and dedicated exhaust system.

The reed valve induction kit when paired with the Dellorto PHBH 30mm carburettor and the dedicated exhaust will see around 30bhp being achieved at the rear wheel.

To order the above or view the complete range of Pinasco Classic Vespa products, visit www.ve-uk.com

You can now order online direct from VE (UK) at www.ve-uk.com or call on 0115 946 2991

NEW - Vespa GTS300 HPE "Speed Wheel"

Brand new at VE (UK) is a cost effective performance upgrade for the Vespa GTS300 HPE scooter.

Although the Vespa GTS HPE has more power at the rear wheel than its predecessors, the top speed unfortunately does not benefit from it due to the inbuilt speed limiter.

The easy to fit “Speed Wheel” (VE60335) sensor ring mounts in place of the original part on the rear wheel, and transmits a true speed reading to the speedometer giving an increase of 6 mph and a more accurate speed reading. A simple recalibration is all thats required to complete the upgrade.

To view the complete range of Vespa GTS300 HPE performance parts from VE (UK), visit: www.ve-uk.com 

You can now order online at www.ve-uk.com or call us on 0115 946 2991.

Royal Alloy, Scomadi, & Lambretta Automatic Accessories

Personalising your pride and joy has always been a big part of scootering for classic Vespa and Lambretta owners. Now Royal Alloy, Scomadi, and Lambretta Auto owners can choose from a wide range of accessories for themselves from VE (UK).

The range includes universal mudflaps, as well as dedicated Lambretta and Scomadi versions, chrome carriers and bodywork protection, Mod styled lamps, a complete range of Mod mirrors with bars and clamps to mount them, and Mod flyscreens for Royal Alloy and Scomadi models.

As owners have come to expect with every product from VE (UK), each and every product is manufactured to the highest quality using only the very best materials.

To view the complete range of accessories for Royal Alloy, Scomadi and Lambretta Auto scooters available from VE (UK), visit: www.ve-uk.com 

You can now order online at www.ve-uk.com or call us on 0115 946 2991.